Treeq

BITUMEN 115/15 IS AIR BLOWN HARD AND OXIDIZED GRADE IN 25KG BAG

bitumen 115 15 oxidized asphalt hard sealant

Bitumen 115/15

What is bitumen 115/15? It is oxidized grade of bitumen with softening point between 110 to 120 centigrade and penetration between 10 to 20 0. millimeter.

Quality of bitumen 115/15

We are exporting premium quality of bitumen 115/15 why? Cause oxidation of bitumen removing the solvent and light material from the bitumen and remain the high carbon content material. Actually oxidized is harm for bitumen and we are passing the Hot air from liquid Bitumen via channel of acid poly phosphoric. It is working in the bitumen as catalyzer and speed up the production with less oxidization and high polymerization. So we deliver bitumen to customer with more useful material.

This process must be happened in continues production and close adiabatic media. So we will have less lost and higher quality and price is less compare other way. Our investment for this machinery is 10 times higher than second grade. We have fast delivery and good price.

Second grade of bitumen 115/15

The second quality is coming from oxidizing tower with very high temperature and pressure but batch by batch and during the production there is too much lost of weight plus there is possibility to burn the oxidized bitumen 115/15 to coke. Cost of production is higher and quality compare the first grade is lower. It is time consuming too and delivery time is long.

Third quality of bitumen 115/15

It is producing by blend of soft bitumen with hard material like Natural asphalt or carbonate calcium. This type of Bitumen 115/15 is contained too much wax also viscosity and melting point is high. The price is very cheap compare other two grades and high density plus after heating due high wax immediately will stop the flow and do not allow worker to work on.

Price of bitumen 115/15

Price of premium grade is approx equal to 30% higher than price of fuel oil. The second grade is 18% higher than fuel oil and the third grade is not standard and any price could be offered from the bitumen 115/15 suppliers.

Packing of bitumen 115/15

Size of packing should be small since it is hard bitumen too difficultly to melt it in big size and normally supplying in 25 kg.

Available packing is:

25kg carton box

It is packed on the pallet and 22.8 tons load in 20ft container and must be stuffed on the pallet otherwise the cartons will torn. Inside of carton is none-stickable sheet and should be removed before melting.

The other packing in the cartons is plastic bag and after you take from carton can directly put it in your melting pot.

25kg PP bag

It is possible to load on pallet or shipping lose packing. While it is on pallet 20 tons can load and while it is lose packing can load 22 tons per 20ft. Inside of this PP bag could be plastic bag with direct use or craft bag with none stickable sheet.

25kg mold packing

It is most expensive packing since there is mold on and with same mold we can ship out. The mold is carton and at destination you can remove the mold easily.

25Kg Polyamide bag

It is heat resistance bag and filling directly in water to cool down fast. It is firstly use not possible to take out the Polyamide from the bitumen and then use.

25kg craft bag

Craft bag is recycle packing and inside is special material to prevent sticking the bitumen to bag. This grade also possible to load on pallet or without pallet for customer.

Bitumen 115/15 in drum packing.

Do not recommend put we have possibility to pack it in drum as well.

Specification of bitumen 115/15

Premium grade

Bitumen 115/15

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

110/120

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

99.5 max

D-4

Spot test

Negative

A.a.s.h.o.t102

 

Second grade

Bitumen 115/15

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

110/120

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

90-95max

D-4

Spot test

Negative

A.a.s.h.o.t102

 

Third grade

Bitumen 115/15

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

110/120

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

80max

D-4

Spot test

Negative

A.a.s.h.o.t102

 

Delivery time of bitumen 115/15

Our production line able to produce 200 tons daily but depend on desire packing our export capacity will change. Bitumen 115/15 is too hot and at 190 centigrade discharging to packing and then 1 days take time to cool down then we can palletize and export it.

Usage of bitumen 115/15

This hard grade of Bitumen mostly using in pipe coating material,paint,ink and waterproofing and shingle factories. High thermal properties and viscosity plus boundary with other material is main specification of this bitumen.

Sample of bitumen 115/15

Sample of Bitumen 115/15 is available freely for your evaluation and just need to book it via your own courier. It is not DG or flammable and ship it as normal cargo. After sample confirmed we will consider the courier charges as discount of cargo to our customer.

How order bitumen 115/15

To order bitumen 115/15 we need to know

Order quantity

Destination

Packing

Your desire Payment term

Why we are No. 1 exporter of bitumen 115/15?

On time delivery

Reasonable price

Guaranteed quality and inspection before shipment Manufacturer of bitumen 115/15 in various packing and marking. We are doing OEM for customer and fill in customer designed packing.

Banking facility.

Office near our customer in Turkey,Hong Kong, Dubai,Montreal, Beijing and Kulalampour.