FLUID LOSS CONTROL DRILLING ADDITIVE

What is fluid loss control?

Drilling fluids are water, organic or gas based fluid systems used to provide circulation during drilling and supplemented with additives. These fluids are commonly described as Drilling Mud in the drilling industry. Completion fluids, on the other hand, are brine (brine) mixtures applied in the well before the drilling phase is completed before being put into production. 

Gilsonite is high temperature high pressure filtrated loss additive

Combination of these compounds as a HPHT fluid loss control aid, reduces HPHT filtrate loss has good stability at elevated temperatures such as at about 300 °F and sometimes as high as 400 °F, stabilizes troublesome shales and decreases bore hole erosion, helps seal depleted sands, reduces torque and drag, causes no adverse effects on the flow properties of the drilling fluid properly conditioned and lowers total well costs.

Packing of drilling fluid loss control lump and powder form

FLC in lump form like rock packed in 500~1000kg jumbo bag

FLC 200 mesh packed in 500~1000kg jumbo bag

Drilling fluid additive 300 mesh packed in 500~1000kg jumbo bag

30-40 mesh packed in 500~1000kg jumbo bag

100 mesh packed in 500~1000kg jumbo bag

300 mesh packed in 25kg pp bag

200 mesh packed 25kg multi paper bag

200 mesh packed 50lbs multi paper bag

Drilling fluid additive 30-40 mesh packed pp bag on pallet

Bulk on vessel

Specification of fluid loss control